The Roweville Run: Three Days at the Pinto Valley Observatory

Sunset at the Pinto Valley Observatory.

We made it to Roweville, deep in the heart of the Mojave Desert, just as the sun was setting. Dr. Russ Genet and I had made the 8 hour journey and were greeted by our host, Dave Rowe, and two others, Dan Gray from Sidereal Technology and Jonah Hare from PlaneWave Instruments. We quickly got settled in and ate dinner, and by the time we were done, it was already very dark since we were completely isolated from any light pollution. It was time to get to work.

The Pinto Valley Observatory, or as we call it, “Roweville”, consists of a 20 inch PlaneWave Corrected Dall-Kirkham (CDK) telescope, a marvelous instrument with superb optics that was designed by Dave, and it was controlled with equipment and software that SiTech (Dan’s company) had produced. The day before Russ and I had arrived, the crew had outfitted the scope with Renishaw encoders which allowed us very high precision tracking and finding sky objects. This was very important since we were using an 4x and a 2x Barlow (for a total of 8x) to do our research, with an Andor Luca-S EMCCD (electron multiplying CCD) camera to gather our data. Our field of view was about 49×32 arc-seconds, so having the ability to precisely slew to objects was crucial, since we didn’t have a lot of wiggle room for inaccuracy.

The 20″ PlaneWave CDK Telescope

Our first night of observations was a success. We used only the 4x Barlow on this night with no filter. We struggled with a few minor problems, like camera drivers issues in Windows, getting the camera to focus since the Barlow was shifting the focal plane very far back (we realized that we had made a mistake and needed to put the spacers in front of the Barlow, not between the camera and the Barlow). After we sorted these minor issues out, I was given a brief lesson on the software by Dan and Jonah, and they let me loose on the controls for the telescope and the camera/data collection. I was very new to all of this equipment, but after we hit a couple of targets, I settled into my work flow and managed to be highly productive at gathering our data. We did a few meridian flips with the scope and the tracking seemed to get off at this point. It was determined that it was not the fault of the scope at all, but the minor shift in the camera instrumentation hanging off of the end of the scope. Our instrumentation extended about 1.5 feet from the back of the scope, creating a perfect lever arm that was at the mercy of gravity to make minor adjustments, even the slightest of which would throw off our FOV at such high magnification. We still were able to get a lot of usable data this first night, with 33 sets and 49,600 images collected. We focused mostly on calibration and drift targets, mostly to get a feel for the equipment and to make sure that the data reflected accurate results. We also collected numerous targets at varying altitudes in the sky in order to compile data on the variance of atmospheric scintillation.

Looking for rocks! From left to right: Jonah, Russ, Dave, Dan

We went for a nice hike the next morning to go rock hunting. Dave knew where to find a nice accumulation of agate, which he explained, had formed from a nearby volcanic explosion that rained a thick layer of white ash down on the area, and as rain water percolated down through the soil, it had deposited silica in successive layers, forming the agate. There were so many beautiful colors in the rocks, and a wide variety of shapes and sized. It provided a good hike and we saw many interesting features of the surrounding area such as Wild Horse Mesa, the Stone House, and many other neat geological features. All of the roads were unpaved, and some required a high clearance vehicle to get across. There were also a couple of campgrounds hidden away in the hills.

A mountain of agate.

The second night, we were able to use our experience from the first night to be much more successful. Dan had made a couple of changes to the tracking software that Russ and I had suggested after using it a bit, and Dan had also written us a simple spiral search script, which allowed us to quickly locate a target that didn’t show up in the FOV right away. This was a huge time saver. We also operated the equipment remotely from the warmth of the main cabin.

We definitely had our system down for this second night, recording 16 sets of data per target, with four different exposure times on four different filters (none, R-band, V-band, and I-band). This allowed us to compare the results and see what integration times and filters worked best for our speckle interferometry. We were able to split some sub arc-second separation double stars using these techniques, which was a huge success for us. We also collected data for a few calibration and drift stars. We got a total of 66 sets and 128,570 images this second night.

Wild Horse Mesa

We woke up and had a nice breakfast, and decided to go for a hike. Dan brought his quadcopter along and we went up into the New York Mountains, into Caruthers Canyon. When we got to the top, we found some abandoned copper mines which Jonah and I ventured into a bit. They seemed pretty steady, and we found old reminants of the mining days in the 1920s, such as big chutes to load up the mine cars, and parts of the track that they ran on. Dan flew his quadcopter up high enough that we almost lost sight of it, then returned it safely to the ground.

Our third night was the most productive, from a scientific standpoint. Dan refined the spiral search script for us, and we knew it was out last night to get data, so we started early, around 7pm. Our focus for this last night was almost entirely production stars, in other words, measuring doubles of various separations, most of which were below 2 arc-secoonds. About two hours into the night, the battery voltage for the ranch was down to 24.0v, so we needed to shut everything down for the night or risk damaging the batteries (Roweville runs off of solar power). We made the decision to unplug all of our laptops and turn off everything on the ranch but the telescope, which got us back up to 24.3v and allowed us to continue the data collection.

Russ looking for the next targets.

Now that Russ and I were under the gun, we became highly productive. We had to move out to the cold “warm room” of the observatory since we couldn’t connect remotely to the observatory computers anymore. Russ and I quickly got situated, and since time was running out, he started listing off targets to me, usually around five at a time. I would then slew the telescope to each of these and record the data in quick succession, and be would have a new list of the next few targets by the time I was done. Unfortunately, power ran out around 11pm and we had to shut everything down, but we had managed to collect 58 sets of data and 99,040 images this last night.

Relaxing and enjoying the view.

I can’t describe how much I learned during this three night stay at Roweville. Dave was a complete gentleman and excellent host. Everyone there during those few days contributed their piece to our research, and provided good company. Even though I was completely unexperienced when I showed up, everyone was very open to showing me how to do things and sharing their vast knowledge and experience with me. As a result, Russ and I will have probably five or six scientific papers coming from the data of this run, although it will take us a few months to compile the 275,000 images, over 25GB of data. It’s a beautiful spot to enjoy dark skies and some great hiking. This was truly a unique experience for me, and made me want to continue on my path towards uncovering the mysteries of the universe even more.

Roweville or Bust!

I’m headed out to the Mojave Desert with Dr. Russ Genet to use the 20-inch PlaneWave CDK telescope at Pinto Valley Observatory at Roweville, owned and run by David Rowe, and I believe Dan Gray (from Sidereal Technology) is also joining us. We have a list of many different targets for gathering data, with our primary goal being speckle interferometry. We are also going to attempt to record data from a lunar occultation of a double star. I can’t wait to leave, this will be an exciting trip! Hopefully the weather cooperates…